View 2N2222AHR_7487016.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

this is information on a product in full production. may 2012 doc id 16558 rev 9 1/18 18 2N2222AHR hi-rel 40 v - 0.8 a npn transistor datasheet ? production data features linear gain characteristics hermetic packages escc and jans qualified european preferred part list eppl up to 100 krad(si) low dose rate description the 2N2222AHR is a silicon planar npn transistor specifically designed and housed in hermetic packages for aerospace and hi-rel applications. it is available in the jan qualification system (mil-prf19500 compliance) and in the escc qualification system (escc 5000 compliance). in case of discrepancies between this datasheet and the relevant agency specification, the latter takes precedence. figure 1. internal schematic diagrami parameter escc jans bv ceo min 40 v 50 v i c (max) 0.8 a h fe at 10 v - 150 ma 100 to-18 lcc-3 3 1 2 lcc-3ub 3 1 2 3 1 2 4 pin 4 in lcc- 3 ub is connected to the metallic lid. table 1. devices summary (1) device qualification agency spec. package radiation level eppl jans2n2222a jans mil-prf-19500/255 lcc- 3 ub -- jansr2n2222a 100 krad - soc2222aub escc 5201/002 lcc- 3 ub -yes soc2222aubxxsw 100 krad yes soc2222a lcc- 3 -yes soc2222axxsw 100 krad yes 2N2222AHR to-18 -- 2n2222asw 100 krad - 1. contact st sales office for information about the specific conditions for products in die form and other jan quality levels www.st.com
content 2N2222AHR 2/18 doc id 16558 rev 9 content 1 electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 jans electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.2 escc electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2. 3 electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.4 test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3 radiation hardness assurance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 5 order codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 6 shipping details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 6.1 data code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 6.2 documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 7 revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2N2222AHR electrical ratings doc id 16558 rev 9 3 /18 1 electrical ratings table 2. absolute maximum ratings symbol parameter value unit v cbo collector-base voltage (i e = 0) 75 v v ceo collector-emitter voltage (i b = 0) for jans devices 50 v collector-emitter voltage (i b = 0) for escc devices 40 v v ebo emitter-base voltage (i c = 0) 6 v i c collector current 0.8 a p tot total dissipation at t amb 25 c escc: to-18 lcc- 3 and lcc- 3 ub lcc- 3 and lcc- 3 ub (1) jans: lcc- 3 ub total dissipation at t case 25 c escc: to-18 1. when mounted on a 15 x 15 x 0.6 mm ceramic substrate. 0.5 0.5 0.7 3 0.5 1.8 w total dissipation at t sp(is) = 25 c jans: lcc- 3 ub 1 w t stg storage temperature -65 to 200 c t j max. operating junction temperature 200 c table 3. thermal data symbol parameter lcc-3 lcc-3ub to-18 unit r thjc thermal resistance junction-case (max) for jans - - c/w thermal resistance junction-case (max) for escc -97 rt hjsp(is) thermal resistance junction-solder pad (infinite sink) (max) for jans 90 - thermal resistance junction-solder pad (infinite sink) (max) for escc -- r thja thermal resistance junction-ambient (max) for jans 3 25 - thermal resistance junction-ambient (max) for escc 3 50 240 (1) 1. when mounted on a 15 x 15 x 0.6 mm ceramic substrate. 3 50
electrical characteristics 2N2222AHR 4/18 doc id 16558 rev 9 2 electrical characteristics jans and escc version of the products are assembled and tested in compliance with the agency specification it is qualified in. the electrical characteristics of each version are provided in dedicated tables. t case = 25 c unless otherwise specified. 2.1 jans electrical characteristics table 4. jans electrical characteristics symbol parameter test conditions min. typ. max. unit i cbo collector cut-off current (i e = 0) v cb = 75 v v cb = 60 v v cb = 60 v t amb = 150 c - 10 10 10 a na a i ces collector cut-off current (i e = 0) v ce = 50 v - 50 na i ebo emitter cut-off current (i c = 0) v eb = 6 v v eb = 4 v - 10 10 a na v (br)ceo (1) collector-emitter breakdown voltage (i b = 0) i c = 10 ma 50 - v v ce(sat) (1) collector-emitter saturation voltage i c = 150 ma i b = 15 ma i c = 500 ma i b = 50 ma - 0. 3 1 v v v be(sat) (1) base-emitter saturation voltage i c = 150 ma i b = 15 ma i c =500ma i b =50ma 0.6 1.2 2 v h fe (1) dc current gain i c = 0.1 ma v ce = 10 v i c = 1 ma v ce = 10 v i c = 10 ma v ce = 10 v i c = 150 ma v ce = 10 v i c = 500 ma v ce = 10 v i c = 10 ma v ce = 10 v t amb = -55 c 50 75 100 100 3 0 3 5 - 3 25 3 00 h fe small signal current gain v ce = 20 v i c = 20 ma f = 100 mhz v ce = 10 v i c =1 ma f = 1 khz 2.5 50 - c obo output capacitance (i e = 0) v cb = 10 v 100 khz f 1 mhz -8pf c ibo output capacitance (i e = 0) v eb = 0.5 v 100 khz f 1 mhz -25pf
2N2222AHR electrical characteristics doc id 16558 rev 9 5/18 2.2 escc electrical characteristics t on tu r n - o n t i m e v cc = 3 0 v i c = 150 ma i b1 = 15 ma - 3 5ns t off turn-off time v cc = 3 0 v i c = 150 ma i b1 = -i b2 = 15 ma - 3 00 ns 1. pulsed duration = 3 00 s, duty cycle 2 % table 4. jans electrical characteristics (continued) symbol parameter test conditions min. typ. max. unit table 5. escc electrical characteristics symbol parameter test conditions min. typ. max. unit i cbo collector cut-off current (i e = 0) v cb = 60 v v cb = 60 v t amb = 150 c - 10 10 na a i ebo emitter cut-off current (i c = 0) v eb = 3 v - 10 na v (br)cbo collector-base breakdown voltage (i e = 0) i c = 100 a 75 - v v (br)ceo (1) collector-emitter breakdown voltage (i b = 0) i c = 3 0 ma 40 - v v (br)ebo emitter-base breakdown voltage (i c = 0) i e = 100 a 6 - v v ce(sat) (1) collector-emitter saturation voltage i c = 150 ma i b = 15 ma - 0. 3 v v be(sat) (1) base-emitter saturation voltage i c = 150 ma i b = 15 ma 0.87 1.2 v h fe (1) dc current gain i c = 0.1 ma v ce = 10 v i c = 10 ma v ce = 10 v i c = 150 ma v ce = 10 v i c = 500 ma v ce = 10 v i c = 10 ma v ce = 10 v t amb = -55 c 3 5 75 100 40 3 5 - 3 00 h fe small signal current gain v ce = 20 v i c = 20 ma f = 100 mhz 3 -10 c obo output capacitance (i e = 0) v cb = 10 v 100 khz f 1 mhz -8pf
electrical characteristics 2N2222AHR 6/18 doc id 16558 rev 9 2.3 electrical characteristics (curves) t on tu r n - o n t i m e v cc = 3 0 v i c = 150 ma i b1 = 15 ma - 3 5ns t off turn-off time v cc = 3 0 v i c = 150 ma i b1 = -i b2 = 15 ma - 285 ns 1. pulsed duration = 3 00 s, duty cycle 2 % table 5. escc electrical characteristics (continued) symbol parameter test conditions min. typ. max. unit figure 2. dc current gain figure 3. collector emitter saturation voltage figure 4. base emitter saturation voltage !-v ,f$ ( ?# ?# ?# 6 #% 6 !-v ?# ,f$ ?# ?# h &% !-v ,f$ ?# ?# ?# h &%
2N2222AHR electrical characteristics doc id 16558 rev 9 7/18 2.4 test circuits figure 5. jans saturated turn-on switching time test circuit figure 6. jans saturated turn-off switching time test circuit
electrical characteristics 2N2222AHR 8/18 doc id 16558 rev 9 figure 7. escc resistive load switching test circuit 1. fast electronic switch 2. non-inductive resistor
2N2222AHR radiation hardness assurance doc id 16558 rev 9 9/18 3 radiation hardness assurance the products guaranteed in radiation within the jans system fully comply with the mil- prf-19500/255 specification. the escc detail specifications for bipolar do not include any specification supporting radiation guarantee. st has therefore developed its own qualification procedure, which is described below: jans radiation assurance st jans parts guaranteed at 100 krad (si), tested, in full compliancy with the mil-prf- 19500 specification, specifically the group d inspection, between 50 and 3 00 rad/s. a brief summary is provided below: all test are performed in accordance to mil-prf-19500 and test method 1019 of mil- std-750 for total ionizing dose. each wafer of each lot is tested. the table below provides for each monitored parameters of the test conditions and the acceptance criteria table 6. mil-prf-19500 (test method 1019) post radiation electrical characteristics symbol parameter test conditions value unit min. max. i cbo collector to base cutoff current v cb = 75 20 a v cb = 60 v 20 na i ebo emitter to base cutoff current v eb = 6 v 20 a v eb = 4 v 20 na v (br)ceo breakdown voltage, collector to emitter i c = 10 ma 50 v i ces collector to emitter cutoff current v ce = 50 v 100 na h fe forward-current transfer ratio v ce = 10 v; i c = 0.1 ma [25] (1) 1. see method 1019 of mil-std-750 for how to determine [h fe ] by first calculating the delta (1/h fe ) from the pre- and post-radiation h fe . notice the [h fe ] is not the same as h fe and cannot be measured directly. the [h fe ] value can never exceed the pre-radiation minimum h fe that it is based upon. v ce = 10 v; i c = 1.0 ma [ 3 7.5] (1) 3 25 v ce = 10 v; i c = 10 ma [50] (1) v ce = 10 v; i c = 150 ma [50] (1) 3 00 v ce = 10 v; i c = 500 ma [15] (1) v ce(sat) collector-emitter saturation voltage i c = 150 ma; i b = 15 ma 0. 3 5 v i c = 500 ma; i b = 50 ma 1.15 v be(sat) base-emitter saturation voltage i c = 150 ma; i b = 15 ma 0.6 1. 3 8 v i c = 500 ma; i b = 50 ma 2. 3
radiation hardness assurance 2N2222AHR 10/18 doc id 16558 rev 9 st radiation guarantee on escc devices each product lot is tested according to the escc basic specification 22900, with a minimum of 11 samples per diffusion lot and 5 samples per wafer, one sample being kept as unirradiated sample, all of them being fully compliant with the applicable escc generic and/or detailed specification. the radiation test is made on biased parts, at v ces = 80% v (br)ceo . they are irradiated between 3 6 and 3 60 rad (si)/h. the key parameters listed in table 7 of each samples are tested when irradiation reaches 3 0, 50, 70 and 100 krad (si) after a 24 hour annealing at room temperature and then after a 168 hours annealing at 100c. if all tested parameters stay within their pre-radiation specification at all measurements steps, parts compliant with the applicable escc generic and/or detailed specification are guaranteed by st at 100 krad (si). table 7. escc post radiation electrical characteristics symbol parameter test conditions min. typ. max. unit i cbo collector cut-off current (i e = 0) v cb = 60 v - 10 na i ebo emitter cut-off current (i c = 0) v eb = 3 v - 10 na v (br)cbo collector-base breakdown voltage (i e = 0) i c = 100 a 75 - v v (br)ceo (1) 1. pulsed duration = 3 00 s, duty cycle 2 % collector-emitter breakdown voltage (i b = 0) i c = 3 0 ma 40 - v v (br)ebo emitter-base breakdown voltage (i c = 0) i e = 100 a 6 - v v ce(sat) (1) collector-emitter saturation voltage i c = 150 ma i b = 15 ma - 0. 3 v v be(sat) (1) base-emitter saturation voltage i c = 150 ma i b = 15 ma 1.2 v h fe (1) dc current gain i c = 0.1 ma v ce = 10 v i c = 10 ma v ce = 10 v i c = 150 ma v ce = 10 v i c = 500 ma v ce = 10 v 3 5 75 100 40 - 3 00
2N2222AHR package mechanical data doc id 16558 rev 9 11/18 4 package mechanical data in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark. table 8. product mass summary package mass (g) lcc- 3 ub 0.06 lcc- 3 0.06 to-18 0.40
package mechanical data 2N2222AHR 12/18 doc id 16558 rev 9 figure 8. lcc-3ub drawings table 9. lcc-3ub mechanical data dim. mm. min. typ. max. a 1.16 1.42 c 0.46 0.51 0.56 d 0.56 0.76 0.96 e 0.92 1.02 1.12 f 1.95 2.0 3 2.11 g 2.92 3 .05 3 .18 i 2.41 2.54 2.67 j 0.42 0.57 0.72 k 1. 3 7 1.52 1.67 l 0.41 0.51 0.61 m 2.46 2.54 2.62 n 1.81 1.91 2.01 r 0.20 r1 0. 3 0 r2 0.56
2N2222AHR package mechanical data doc id 16558 rev 9 1 3 /18 figure 9. lcc-3 drawings table 10. lcc-3 mechanical data dim. mm. min. typ. max. a 1.16 1.42 c 0.45 0.50 0.56 d 0.60 0.76 0.91 e 0.91 1.01 1.12 f 1.95 2.0 3 2.11 g 2.92 3 .05 3 .17 i 2.41 2.54 2.66 j 0.42 0.57 0.72 k 1. 3 7 1.52 1.67 l 0.40 0.50 0.60 m 2.46 2.54 2.62 n 1.80 1.90 2.00 r 0. 3 0 2 1 3
package mechanical data 2N2222AHR 14/18 doc id 16558 rev 9 figure 10. to-18 drawings table 11. to-18 mechanical data dim. mm. min. typ. max. a 12.7 b 0.49 d 5. 3 e 4.9 f 5.8 g 2.54 h 1.2 i 1.16 l 45
2N2222AHR order codes doc id 16558 rev 9 15/18 5 order codes table 12. ordering information part number agency specification eppl quality level radiatio n level package lead finish marking (1) packing 2n2222aub1 - - engineering model escc - lcc- 3 ub gold u20 waffle pack j2n2222aub1 - engineering model jans lcc- 3 ub gold j2n2222a waffle pack soc2222a - - engineering model escc - lcc- 3 gold n20 waffle pack jans2n2222aubg mil-prf-19500/255 - jans flight - lcc- 3 ub gold js2222 waffle pack jans2n2222aubt mil-prf-19500/255 - jans flight - lcc- 3 ub solder dip js2222 waffle pack jansr2n2222aubg mil-prf-19500/255 - jans flight 100 krad lcc- 3 ub gold jsr2222 waffle pack jansr2n2222aubt mil-prf-19500/255 - jans flight 100 krad lcc- 3 ub solder dip jsr2222 waffle pack soc2222aub11sw 5201/002/11 yes escc flight 100 krad lcc- 3 ub gold 520100211 waffle pack soc2222aub12sw 5201/002/12 yes escc flight 100 krad lcc- 3 ub solder dip 520100212 waffle pack soc2222aub11 5201/002/11 yes escc flight - lcc- 3 ub gold 520100211 waffle pack soc2222aub12 5201/002/12 yes escc flight - lcc- 3 ub solder dip 520100212 waffle pack soc2222asw 5201/002/04 or 05 (2) yes escc flight 100 krad lcc- 3 gold or solder dip (2) 520100204 or 05 (2) waffle pack soc2222ahrb 5201/002/04 or 05 (2) yes escc flight - lcc- 3 gold or solder dip (2) 520100204 or 05 (2) waffle pack 2N2222AHR 5201/002/01 or 02 (2) - escc flight - to-18 gold or solder dip (2) 520100201 or 02 (2) waffle pack 1. specific marking only. the full marking includes in addition: for the engineering models : st logo, date code, country of origin (fr). for escc flight parts : st logo, date code, country of origin (f r), esa logo, serial number of the part within the assembly lot . for jans flight parts : st logo, date code, country of origin (fr), manufacturer code (cstm), serial number of the part within the assembly lot. 2. depending escc part number ment ioned on the purchase order.
shipping details 2N2222AHR 16/18 doc id 16558 rev 9 contact st sales office for information about the specific conditions for: ? products in die form ? other jans quality levels ? tape and reel packing 6 shipping details 6.1 data code data code is structured as described below: ? em (escc and jans) xyywwz ? escc flight yywwz ? jans flight xyywwz where: 6.2 documentation xyywwz 3 : em w: flight part/ diffused in singapore last two digits year week digits lot index in the week table 13. documentation provided for each type of product quality level radiation level documentation engineering model - - jans flight - certificate of conformance jansr flight 100 krad certificate of conformance 50 rad/s radiation verification test report escc flight - certificate of conformance 100 krad certificate of conformance 0.1 rad/s radiation verification test report
2N2222AHR revision history doc id 16558 rev 9 17/18 7 revision history table 14. document revision history date revision changes 04-jan-2010 1 initial release 16-apr-2010 2 added table 1 on page 1 09-jul-2010 3 modified: table 1 on page 1 and table 11 on page 14 3 0-nov-2011 4 ? modified: table 5 on page 5 ? added: section 2.3: electrical characteristics (curves) ? modified: table 1 and 2 ? added: ta bl e 2 , 11 , 12 ? minor text changes in the document title and description on the coverpage 12-dec-2011 5 minor text changes to improve readability 17-apr-2012 6 updated: ? title and description in cover page. ?p tot in table 2: absolute maximum ratings . ? the entire section 2: electrical characteristics . ? table 12: ordering information . added: ? table 3: thermal data , section 3: radiation hardness assurance and table 12: ordering information . ? figure 5: jans saturated turn-on switching time test circuit and figure 6: jans saturated turn-off switching time test circuit . ? section 6: shipping details . 19-apr-2012 7 updated titles in figure 5: jans saturated turn-on switching time test circuit and figure 6: jans saturated turn-off switching time test circuit . 24-apr-2012 8 updated r thja value in table 3: thermal data . 14-may-2012 9 updated table 12: ordering information .
2N2222AHR 18/18 doc id 16558 rev 9 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by two authorized st representatives, st products are not recommended, authorized or warranted for use in military, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or register ed trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2012 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com

▲Up To Search▲

Price & Availability of 2N2222AHR

	To Download 2N2222AHR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .